Preserve and protect auto seats with Seat Savers Protective Seat Covers

	Seat Cover Installation and Care Instructions

Our SeatSavers by Supreme True-Fit® and H2Out® seat covers are as easy as 1-2-3 to install and just as easily removed if soiled. You really don't have to spend a lot of money or effort to keep your cars seats clean. SeatSavers by Supreme provides an effortless and inexpensive solution with our custom seat covers created to protect your seats and designed to fit your cars seats snugly and stay in place until you want to take them off and wash them which can be done in the comfort of your own home. A copy of these Installation and Care instructions is included with each seat cover order. If you still have questions or concerns, please give us a call at 1-800-584-3858 or write us at info@seatsavers.com.

I. INSTALLATION:
Do not install seat covers on seats with Airbags UNLESS they have a full opening for deployment on outboard part of seat. Otherwise, this could cause a sever malfunction and lead to personal injury. ONE-PIECE SEAT COVERS Please Note: If headrests are adjustable, remove by pressing button on side. Some cars & trucks (Chevy, Dodge, Ford & GMC) have a tiny hole on the plastic cap. Insert paper clip into hole in order to release headrest. Refer to Owner's Manuals for more details on how to remove headrests if necessary. Study seats and seat covers for any openings to help determine driver and passenger seats. Note: identical opening on one side in each seat cover may be the airbag opening, thus this opening goes toward the outboard (toward door) side of each seat.
	1.	Slide seat covers over backrest firmly but gently pulling down evenly on both sides. Because of the custom-fit (snug) design of these seat covers, careful manipulation may be necessary to conform to seats. You may loosen elastic bungee cord at the bottom if additional slack is needed - but be careful: first tie a knot at the end of the cord to secure it.
	2.	Once seat cover is installed over backrest, tilt the backrest forward - pulling the elastic loops (from inside of the cover) through the crack between the upper backrest and lower seat section and hook under seat cushion.
	3.	Return backrest to its vertical position. Pull the bottom section of the seat cover around seat cushion while aligning all openings for knobs or levers. Pull the bungee cord tightly to assure proper fit, tie and tuck under seat and/or close all applicable Velcro openings. Do not cut off excess bungee as this slack will be necessary when removing for wash. When applicable, replace headrests and carefully pull headrest covers over headrests and/or armrests.

TWO-PIECE SEAT COVERS Please Note: If headrests are adjustable, remove by pressing button on side. Some cars & trucks (Chevy, Dodge, Ford & GMC) have a tiny hole on the plastic cap. Insert paper clip into hole in order to release headrest. Refer to Owner's Manuals for more details on how to remove headrests if necessary. Study seats and seat covers for any openings to help determine driver and passenger seats. Note: identical opening on one side in each seat cover may be the airbag opening, thus this opening goes toward the outboard (toward door) side of each seat.
	1.	Slide seat covers over backrest firmly but gently pulling down evenly on both sides then wrap the bottom front under the seat (towards the back) and attach to rear Velcro.. Because of the custom-fit (snug) design of these seat covers, careful manipulation may be necessary to conform to seats.
	2.	Slip the bottom seat cushion cover around the seat cushion while aligning all openings. Pull any straps through to back and tie bungee cords tightly. Tuck any excess bungee cord inside cover but do not cut as this slack wil be necessary when removing for wash.

II. CARE:

We recommend dark colors be washed before wearing to “set” color and prevent excess fading. Do this after you've tried seat covers on and are satisfied with their fit. Both TrueFit and H2Out seat covers are machine washable.
	1.	Prior to washing, you MUST first remove the hooks attached to the elastic straps inside as these can cause damage during spinning cycles. Turn covers inside out and wash in gentle cycle using mild detergent. You may Tumble-Dry at “Air” or “Low” settings, however, line drying is recommended.

As you can see our seat covers are simple to install and simple to care for. It's a well spent investment in your vehicle to protect your front and rear seats with SeatSavers by Supreme Protective Seat Covers for Cars, Trucks, SUVs and Vans. It'll really pay off when you go to turn in your owned or leased vehicle because you'll preserve more value when your interior is in "as-new" condition. But even if your vehicle isn't brand new, it's still "better late than never"! You'll be happy you went with our auto seat covers for they are are custom-made to fit your vehicle's seats perfectly, installing them and caring for them is simple and you'll get years of protectionn out of them. Once your auto seat protector covers are securely installed you'll enjoy a new style while protecting your original vehicle seats without all the hassle of constant re-adjestment. If they become soiled, simply remove, wash and re-install with ease. If you still have questions or concerns, please give us a call or write us.

We GUARANTEE you're getting the best seat covers anywhere! As for our service, your satisfaction will speak for us. THANK YOU FOR YOUR BUSINESS AND TRUST!

Seat Savers Plus, Inc

12105 SW 129th Court,
Bays 10 & 11, Miami, FL 33186
Phone: 305-256-2986
Fax: 305-256-8278
Toll Free: 1-800-584-3858

Seat Cover Installation and Care Instructions

Seat Cover Installation
and
Care Instructions